Tripp-Lite UPS SMART1500RMXL2U SmartPro 120V 1.5kVA 1.35kW 2U LCD USB DB9

Protects Mission-Critical Rack-Mounted Equipment
-Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
-Audible alarm signals loss of utility power, overload, low battery and fault conditions
-8 NEMA 5-15R outlets
-10 ft. power cord with 120V NEMA 5-15P input
-0.9 power factor rating
-570-joule surge suppression rating
Reliable Battery Backup with Expandable Runtime
-Supports half load up to 14 min. and full load up to 4.9 min.
-Internal batteries designed for hot-swap field replacement
-95% line-power efficiency rating saves money in energy costs
-Expandable runtime with optional external battery packs, such as Tripp Lite’s BP36V15-2U
2 Load Banks with Switchable Outlets
-Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
-Maintains 120V nominal output over input range of 83V–145V without using battery power
EMI/RFI Line Noise Filtering
-Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
Interactive LCD Screen
-Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
-Rotates for easy viewing in rack-mount or tower configurations
Network Management Cards
-Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
Communications Ports
-USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
-EPO port supports emergency shutdown in large facilities

OUTPUT
- Output Volt Amp Capacity (VA):
1500
- Output kVA Capacity (kVA):
1.5
- Output Watt Capacity (Watts):
1350
- Output kW Capacity (kW):
1.35
- Output Capacity Details:
Output is reduced to 1200 watts maximum when used with external battery packs
- Power Factor:
0.9
- Nominal Output Voltage(s) Supported:
110V, 115V, 120V
- Nominal Voltage Details:
120v nominal output in battery mode
- Frequency Compatibility:
60 Hz
- Output Voltage Regulation (Line Mode):
-14%, +6%
- Output Voltage Regulation (Battery Mode):
+/- 5%
- Output Receptacles:
(8) 5-15R
- Load Management Receptacles:
Two switchable two-outlet 5-15R load banks
- Output AC Waveform (AC Mode):
Sine wave
- Output AC Waveform (Battery Mode):
Pure Sine wave
INPUT
-Rated input current (Maximum Load):
12A
- Nominal Input Voltage(s) Supported:
120V AC
- UPS Input Connection Type:
5-15P
- Input Circuit Breakers:
15A
- UPS Input Cord Length (ft.):
10
- UPS Input Cord Length (m):
3.1
- Recommended Electrical Service:
15A 120V
- Input Phase:
Single-Phase
BATTERY
- Full Load Runtime (min.):
4.9 min. (1350w)
- Half Load Runtime (min.):
14 min. (675w)
- Expandable Battery Runtime:
Extended runtime supported via optional external battery packs
- External Battery Pack Compatibility:
BP36V15-2U (limit 1), BP36V42-3U (multi-pack compatible), BP36V27-2US (multi-pack compatible)
- DC System Voltage (VDC):
36
- Battery Recharge Rate (Included Batteries):
Less than 4.5 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge:
RBC93-2U
- Battery Access:
Front panel battery access door
- Battery Replacement Description:
Hot-swappable, user replaceable batteries
- Expandable Runtime:
Yes
VOLTAGE REGULATION
- Voltage Regulation Description:
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
- Overvoltage Correction:
Input voltages between 127 and 145 are reduced by 12%
- Undervoltage Correction:
Input voltages between 95 and 108 are boosted by 12%
- Severe Undervoltage Correction:
Input voltages between 83 and 94 are boosted by 24%
USER INTERFACE, ALERTS CONTROLS
- Front Panel LCD Display:
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
- Switches:
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
- Alarm Cancel Operation:
Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available
- Audible Alarm:
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
- UPS AC Suppression Joule Rating:
570
- UPS AC Suppression Response Time:
Instantaneous
- EMI / RFI AC Noise Suppression:
Yes
PHYSICAL
- Included Mounting Accessory Description:
4 post rackmount installation accessories included
- Installation Form Factors Supported with Optional Accessories:
2 post rackmount (2POSTRMKITWM) Wallmount (2POSTRMKITWM) Tower (2-9USTAND)
- Primary Form Factor:
Rackmount
- Rack Height (U Spaces):
2
- Cooling Method:
Fan
- UPS Housing Material:
Steel
ENVIRONMENTAL
- Operating Temperature Range:
+32 to +104^OF / 0^OC to +40^OC
- Storage Temperature Range:
+5 to +122^OF / -15^OC to +50^OC
- Relative Humidity:
0 to 95% non-condensing
- AC Mode BTU / Hr. (Full Load):
237
- Battery Mode BTU / Hr. (Full Load):
751
- AC Mode Efficiency Rating (100% Load):
95%
COMMUNICATIONS
- Communications Interface:
USB, DB9 Serial, EPO (emergency power off) Slot for SNMP/Web interface
- Network Management Cards:
SNMPWEBCARD, TLNETCARD, WEBCARDLX
- Network Monitoring Port Description:
Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software:
For local monitoring via the UPSs built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable:
USB and DB9 cabling included
- WatchDog Compatibility:
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
- Transfer Time:
4 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
- Low Voltage Transfer to Battery Power (Setpoint):
83
- High Voltage Transfer to Battery Power (Setpoint):
145
SPECIAL FEATURES
- Grounding Lug:
Back panel grounding lug
- Cold Start (Startup in Battery Mode During a Power Failure):
Cold-start operation supported
- High Availability UPS Features:
Hot swappable batteries
- Green Energy-Saving Features:
Greater than 95% efficiency - GREEN UPS,
Individually controllable load banks
CERTIFICATIONS
-UPS Certifications:
Meets FCC Part 15 Category A (EMI), ROHS (Restriction of Hazardous Substances), Tested to CSA (Canada) Tested to NOM (Mexico), Tested to UL1778 (USA)
Package Includes
-SMART1500RMXL2UA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS
-USB cable
-DB9 cable
-EPO cable
-Mounting hardware
-Owners manual
Item Dimension (L inchxW inchxH inch)
9 x 23 x 20
Weight
57.80lb
Warranty Information
2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.