Tripp Lites SMART 500RT1U intelligent line interactive rack tower

Balance Tech
Out of stock


Tripp Lites SMART 500RT1U intelligent line interactive rack tower
SMART 500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 17 minutes half load runtime and 5 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA / 300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

Voltage compatibility - 120V AC
Frequency compatibility - 60 Hz
Output volt amp capacity (VA) - 500 , Output watt capacity (watts) - 300 , Output nominal voltage - 120V AC
Output voltage regulation - LINE MODE---Sine wave line voltage 120V (below 15 percent or above 13 percent) , BATTERY MODE---Inverter output regulated to 60Hz above or below 1Hz
Outlet quantity / type - 7 NEMA 5-15R
Customized load management receptacles - Includes single-outlet load bank that supports automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices.
Overload protection - Via 15A input breaker
Maximum input amps - 5.6A
Input connection type - NEMA 5-15P
Input cord length - 10 ft., 14 gauge, Black
Recommended electrical service - 15A 120V
BATTERY - Full load runtime---5 minutes (500VA) , Half load runtime---17 minutes (250VA) , DC system voltage---12 VDC , Typical battery lifespan---3-6 years, depending on usage , Battery recharge rate---2-4 hours to 90 percent
Replacement Battery Cartridge - RBC62-1U
Voltage regulation description - Line interactive voltage regulation system corrects brownouts as low as 90 volts back to usable 120V nominal levels
Brownout correction - Input voltages between 90 and 108 are boosted by 14 percent
Front panel LEDs - 5 front panel LEDs - green POWER LED, green AVR LED, 3-color BATTERY CHARGE LED, 3-color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Alarms - Audible alarm warns of power failure, overload, UPS fault and low battery conditions
Switches - Includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
AC surge suppression - 480 joules
AC suppression response time - Instantaneous

Mfg Part #:
Part #:

Good to know