Tripp-lite Switched Metered PDU with ATS PDUMH20ATNET

Balance Tech
Out of stock


Tripp-lite Switched Metered PDU with ATS PDUMH20ATNET
Tripp Lite‘s 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power status via secure network or web browswer interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management. Supports notification and logging of input power status, event notification, output power and load conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 16 NEMA 5-15/20R outlets, and optional-use dual cords for auto- transfer switching (ATS) options. Each input plug supports 5-20P and L5-20P input.

System overview -- Multi-outlet PDU with Current Monitoring and Sequential Power-on, Configurable to operate from either one or two 120v input power sources. Remote Monitoring with Outlet Control.
Voltage compatibility -- 120V
Frequency compatibility -- 50/60 Hz
Output volt amp capacity (VA) -- 20A / 2400VA
Output nominal voltage -- 120V
Outlet quantity / type -- 16 NEMA 5-15/20R
Customized load management receptacles -- 16 individually controlled load management receptacles
Maximum input amps -- 20A
Input connection type -- 2 NEMA L5-20P with 2 NEMA 5-20P plug adapters
Input cord length -- Both input cables are 12 ft / 3.6m - the cables each terminate to a L5-20P locking plug on the input side. Two included 6 inch plug adapters convert the locking plugs to NEMA 5-20P plugs
Recommended electrical service -- 120V 20A, dedicated line recommended
Front panel LEDs -- 16 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line cord. Digital current meter display shows the amount of power consumption in amps for entire output of PDU.
Shipping weight -- 16.4 lbs / 7.4 kg
Unit weight -- 12.2 lbs / 5.5 kg

Mfg Part #:
Part #:

Good to know