StarTech PEXUSB3S3GE 3PT PCIE USB3.0 Card + Gigabit Ethernet Retail

Balance Tech
Out of stock


StarTech PEXUSB3S3GE 3PT PCIE USB3.0 Card + Gigabit Ethernet Retail
This PCIe USB 3.0 card couples your peripheral and network connections into a single, scalable solution.
By combining three USB 3.0 ports and one RJ45 port onto a single card, you only need a single PCIe slot for installation, which lets you free up space for other add-ons or upgrades and get more out of your desktop or server.

Combo-card convenience and cost-savings
If you have separate cards for your USB and network connections, this versatile card overcomes the aggravation of running out of PCIe slots while helping to reduce clutter inside your PC.

This dual-purpose card is perfect for building or upgrading your computer. It helps you save money by avoiding the additional costs of purchasing separate USB 3.0 and Gigabit Ethernet adapters.

Flexible install options and legacy device support
You can rest assured this card will fit in your small form-factor system, if needed. It features a dual-profile design that makes it easy to install in either standard or low-profile cases.

The combo card makes it easy to connect peripherals such as your external hard drives or mobile devices. Plus, its backward compatible with USB 2.0 and 1.x, so you wont have to replace all of your existing USB devices.

Bus Type:PCI Express
Card Type:Standard Profile (LP bracket incl.)
Chipset ID:
Renesas / NEC - PD720201 (USB 3.0)
Realtek - RTL8153 (LAN)
Industry Standards:
USB 3.0 Specification Rev. 1.0
PCI Express Base Specification Rev. 2.0
Intel xHCI Specification Rev. 1.0

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T

IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.3x Flow Control, 802.1q VLAN Tagging, 802.1p Layer 2 Priority Encoding
USB 3.0
RJ45 (Gigabit Ethernet)

Port Style:Integrated on Card
Auto MDIX:Yes
Compatible Networks:10/100/1000 Mbps
Flow Control:Full duplex flow control
Full Duplex Support:Yes
Jumbo Frame Support:9K max.
Maximum Data Transfer Rate:
5 Gbps (USB 3.0)
2 Gbps (Ethernet Full-Duplex)
MTBF:1,920,042 Hours
Type and Rate:USB 3.0 - 5 Gbit/s
UASP Support:Yes
Connector Type(s):1 - PCI Express x1 Male

External Ports:
3 - USB 3.0 A (9 pin SuperSpeed) Female
1 - RJ-45 Female

Internal Ports:1 - SATA Power (15 pin) Plug
OS Compatibility:
Windows 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Windows Server 2012, 2008 R2
Linux 2.6.31 and up (Tested up to 3.5)
Special Notes / Requirements
Note:The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5 Gbps.
UASP (USB Attached SCSI Protocol), is supported in Windows 8, 8.1, Server 2012 and Linux kernel 2.6.37 or later. Test results were obtained using an Intel Ivy Bridge system, add-on USB 3.0 cards, a UASP-enabled enclosure, and a SATA III solid-state drive.
System and Cable Requirements:
PCI Express enabled computer with an available PCI Express x1 slot or higher (x4, x8, x16)
SATA power connector (recommended, but optional)
LED Indicators:1 - Link (Green)
1 - Activity (Amber)

Included in Package
1 - 3 Port PCI Express USB 3.0 Card w/ Gigabit Ethernet
1 - Low-Profile Bracket
1 - Driver CD
1 - Instruction Manual
Item Dimension (L"xW"xH"):
5.59 x 6.69 x 1.18

0.33 lb

Warranty Information:
2 Year Warranty

Mfg Part #:
Part #:

Good to know