D-Link Network DGS-1510-20 SmartPro 16Port Switch w 2 SFP and 2 10GbE SFP+

Balance Tech
In stock
150693

$272.99

Brand:
D-Link Network DGS-1510-20 SmartPro 16Port Switch w 2 SFP and 2 10GbE SFP+
− +
Add to Compare
The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, these switches also include 2 Gigabit SFP ports and 2 10G SFP+ ports.



Two 10G SFP+ Stacking/Uplink Ports


Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting.



Flexibility and Scalability


The DGS-1510 Series supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables and removes distance barriers that can limit topology options when using other stacking technology.

Port Standards and Functions
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
802.3ae 10 GbE,
IEEE 802.3x Flow Control for Full-Duplex Mode,
Auto-negotiation
Number of Ports
DGS-1510-20: 16 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+

Network Cables
UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex
Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange
Auto or configurable MDI/MDIX
Performance
Switching Capacity
DGS-1510-20: 76 Gbps
Transmission Method
Store-and-forward
MAC Address Table
16,000 entries per device
MAC Address Update
Up to 512 static MAC entries,
Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate
DGS-1510-20: 56.54 Mpps
Packet Buffer Memory
DGS-1510-20: 1.5 MB per device
PoE (DGS-1510-28P only)
PoE Standard IEEE 802.3af, 802.3at
PoE Capable Ports Ports 1 to 24: Up to 30 W
PoE Power Budget Max. 193 W
AC Input
100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption
DGS-1510-20: 20.3 W
Standby Power Consumption
DGS-1510-20: 12.2 W
Smart Fan Quantity
DGS-1510-20: 1
Acoustics
DGS-1510-20: 43.8 dB(A)
Heat Dissipation
DGS-1510-20: 41.602 BTU/hr
Dimensions
DGS-1510-20:
11 x 7.09 x 1.73 inches (280 x 180 x 44 mm)
19 standard rack mounting width, 1U height
Diagnostic LEDs
Power/Stacking ID/Fan (per device),
Link/Activity/Speed (per 10/100/1000 Mbps port),
Link/Activity/Speed (per Gigabit SFP port),
Link/Activity/Speed (per 10G SFP+ port)
Certifications
CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Item Dimension (L"xW"xH"):
22.17 x 14.33 x 14.92

Weight:
32.28 lb

Warranty Information:
Limited Lifetime

Brand:
D-Link
GTIN:
790069399459
Mfg Part #:
DGS-1510-20
Part #:
DGS-1510-20
Weight:
5.97

Related products

New Arrivals

Good to know

Full product warranty
No worries whatsoever

For Return's
Contact us for RMA instructions