CONVOY S11 GT FC40 2500LM High CRI Tactical Flashlight 26650 Battery High Color Rendering Floody Light Super Bright Hunting Riding Night Fishing LED Torch

Condition: New
CMart
Out of stock
1849560

$35.99

CONVOY S11 GT FC40 2500LM High CRI Tactical Flashlight 26650 Battery High Color Rendering Floody Light Super Bright Hunting Riding Night Fishing LED Torch

?Specifications:

Host color

Gray/Black/Silver

Gear group

Gear group

Reflector

Orange peel

Lamp beads

GT FC40 high color rendering LED

Drive

Maximum output current of 2.5A, non-PWM,constant current without flicker, built-in temperature control (current slow down function).

The number of batteries required

One 26650 or one 18650 lithium battery (not included), there are two 18650 to 26650 O-rings inside. (Requirement: The battery for this flashlight can withstand more than 10A current.)

Luminous flux

2000-2500LM

Color temperature

5000-5500K (basically white light) / 4000-4500K (neutral white light, yellowish light color)

Color rendering index

Above 90

Illumination

Maximum 17.5KCD

Range

Up to 265 meters

Light emitting angle of whole spot: 87 degrees

Light emitting angle of whole spot: 87 degrees

Central spot light angle

40 degrees

Diameter

33mm

Length

139mm

Net weight

167g


Flashlight protection function description:

(1) Flashlight memory function: if the flashlight is turned off for more than 3 seconds, the current mode will be memorized.

(2) Low voltage protection: When the battery working voltage (not no-load voltage) is 3.0V, the flashlight will give an alarm, showing weak brightness and flickering. The flashlight turns off automatically at 2.8V.

(3) Battery reverse connection protection: the flashlight will not turn on when the battery is reversed, there is no abnormalities, and there is no need to worry about burning the battery or circuit.

(4) Temperature protection management: When the temperature control chip detects 55 degrees Celsius (the case temperature should be lower than this value), it will automatically reduce the current.


12 groups:

1.click the switch to turn the flashlight on/off,tap the switch to select mode

2.if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and 'tap the switch in the flashing process' means to select the option.)

   Option 1 (normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.

       -------------sub-option 1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)

       -------------sub-option 1.2 (normal-flash 2 times) : tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%)

       -------------sub-option 1.3 (normal-flash 3 times) : tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%)

       -------------sub-option 1.4 (normal-flash 4 times) : tap the switch to select mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS)

       -------------sub-option 1.5 (normal-flash 5 times) : tap the switch to select mode group 5 (1%, 20%, 100%)

       -------------sub-option 1.6 (normal-flash 6 times) : tap the switch to select mode group 6 (100%, 20%, 1%)

       -------------sub-option 1.7 (normal-flash 7 times) : tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)

       -------------sub-option 1.8 (normal-flash 8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)

       -------------sub-option 1.9 (normal-flash 9 times) : tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%)

       -------------sub-option 1.10 (normal-flash 10 times) : tap the switch to select mode group 10 (1%, 10%, 35%, 100%)

       -------------sub-option 1.11 (normal-flash 11 times) : tap the switch to select mode group 11 (100%, 20%, strobe)

       -------------sub-option 1.12 (normal-flash 12 times) : tap the switch to select mode group 12(100% only)

   Option 2 (normal-flash 2 times + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode.


battery-check  instructions:

 <2.95V    1 flash,

2.95-3.25V  2 flashes,

3.25-3.55V  3 flashes,

3.55-3.85V  4 flashes,

>3.85V     5 flashes


Package Included:

1 x Tactical Flashlight

Related products

Good to know